Simple Steam Engine

Share
Embed
Loading...

Comment

  • Bibek Sunar

    Bibek Sunar

     a years ago +584

    Please make a rocket powered by acetylene gas obtained from calcium carbide reacted with h20.

  • Mickey Trixster

    Mickey Trixster

     5 months ago +50

    this is pretty much a pop pop boat it uses that way to move in the water

  • Priyo M

    Priyo M

     a years ago +242

    tuk tuk boat

  • Dennis Schmidt

    Dennis Schmidt

     5 months ago +25

    Fill the tubing with sand before bending, the sand will prevent it from kinking, and hold it's shape better rather than flattening out.
    Then remove the sand with a vacuum or a puff of air.

  • Flamingskullgaming

    Flamingskullgaming

     a years ago +9

    use this concept to make a boat and then drive it in the lake

  • Steven M

    Steven M

     8 months ago +15

    Umm ... It stalled because you bent both tubes clockwise . One is an intake , one is an exhaust ... They should be faced oppositional , clockwise and the other counter clockwise . It's a boondocks water heater ... When it stops spinning the water is as hot as it will get .

  • Riley Howe Grenier

    Riley Howe Grenier

     1 months ago +4

    Can you please make a huge version of this👍👑

  • Michio Oliver

    Michio Oliver

     a years ago +13

    You should have bent both tubes the same direction so that as it turned water would be forced into one of the tubes as it shot out the other

  • Martin VL

    Martin VL

     a years ago +136

    I had a bathtub "putt putt" boat that ran with this candle motor 55 years ago. It was made in Japan after the war (Cheap Japanese Junk - at the time :-) The loop was horizontal (not verticle - I think you got that wrong) and it made twice the power as this design and a cool "Putt Putt" noise.

  • Chetan Vora

    Chetan Vora

     a years ago +142

    Nailed it! But I have seen toy boats with same steam engine and boat works like charm! Can you teach us?

  • claudia arevalo

    claudia arevalo

     14 days ago +2

    Rip king of random 😭😿🥺

  • HateHater

    HateHater

     a years ago +191

    Those gloves! Kills me every time! 😂😂🤣🤣

  • v8trauma

    v8trauma

     5 months ago +3

    Small diameter copper pipe? Brake pipe fits that description quite nicely. Available in a variety of materials including copper.

  • Angus NZ

    Angus NZ

     5 months ago +11

    Try making a pop pop or put put boat. :)

  • Fabian Diaz

    Fabian Diaz

     a years ago +36

    Can you try to hydro dipping dry ice?

  • Spykidc Gaming

    Spykidc Gaming

     a years ago +2

    You now have a 2D version of that canister

  • Mr. Wizard

    Mr. Wizard

     1 months ago +1

    I'm gonna build one and put it in my neighbors toilet

  • Crazykidd1357 000

    Crazykidd1357 000

     21 days ago +3

    Can I play TF2 on this

  • mark walburg

    mark walburg

     2 days ago

    I wonder if you put a tiny piece of tape in front of one of the ends and folded over like a one way valve it would go faster because there is no mild suction from the thrust side when the engine cycles.

  • Specific Love Creations

    Specific Love Creations

     a years ago +614

    Love the simplicity